100 Pound Accumulator Head Blow Molding Machine

* Shot size 100 pounds HDPE
* Drop rate maximum 12 pounds/second
* Ram stroke 10 inches
* Tooling cylinder stroke 2 inches
* Tooling diameter (minimum) 12 inches
* Tooling diameter (maximum) 28 inches
* Total heater KW 160 KW

PRESS - 60 inches wide X 120 inches high clamping section
* Our press designs are based on the unique principal of pulling
the molds closed to achieve full clamp tonnage. This concept allows
all custom presses to bring the mold faces in parallel, as the
end frames have no load on them.

* The platens are closed in high speed with individual, small bore
cylinders to minimize oil flow for maximum efficiency. High pressure
clamping is accomplished by rotating knuckle clamps which, when engaged,
pull the molds closed. These short stroke, large bore cylinders
generate high tonnage, but with little oil flow. This method assures
no deflection of the end frames and no axial stressing of the tie bars.

* Further, our 100 Pound Accumulator Head Blow Molding Machine has platens which ride on ways. This takes the
dead platen and mold weight off the tie rods to further assure no
deflection takes place to disturb parallelism.

* To bring the platens together on center repeatedly, dual chain
synchronization is applied. Mounted out of the press working area, the
adjustable chain systems are located on the front and back of the
platens so that forces are distributed equally. Easy adjustment can
be made for off center close or adjustment.

* Also, standard on all presses is a safety system of electrical and
hydraulic interlocks as well as whiskers to sense if an operator is in
the press area. Emergency stops are located at five points around the
machine and the entire press area is enclosed by expanded metal. This
assures that all pinch points are guarded for safe operation.

Accumulator Head Blow Molding Equipment

Manufactures custom designed accumulator head blow molding systems for a range of packaging applications capable of processing PVC, polyolefins, and engineered thermoplastics.

Manufacturer of aluminium blow molds for the PET reheat stretch blow molding process. Able to provide blow mold designing and prototyping services.

Manufacturer of plastic blow molding machines and equipment, mold capacities from 20cc to 200 liters in PE, PP and PVC materials.

100 Pound Blowing Molding Machine

Manufacturer of plastic blow molding machines and equipment, mold capacities from 20cc to 200 liters in PE, PP and PVC materials.

Specializing in building extrusion blow molds and designing and building of machine specific trim tooling.

Manufacturer of standard and automatic blow moulding machines, also manufactures moulds and bottles. Hong Kong.

Accumulator Head Blow Molding Machine

Manufactures custom designed accumulator head blow molding systems for a range of packaging applications capable of processing PVC, polyolefins, and engineered thermoplastics.

Manufacturer of plastic blow molding machines and equipment, mold capacities from 20cc to 200 liters in PE, PP and PVC materials.

Specializing in building extrusion blow molds and designing and building of machine specific trim tooling.

100 Pound Accumulator Head Blow Molding Machine

Manufactures custom designed accumulator head blow molding systems for a range of packaging applications capable of processing PVC, polyolefins, and engineered thermoplastics.

Manufacturer of plastic blow molding machines and equipment, mold capacities from 20cc to 200 liters in PE, PP and PVC materials.

Specializing in building extrusion blow molds and designing and building of machine specific trim tooling.

Full Electrical Blowing Machine

Manufactures a full line of machines for the manufacture of electric motors.

Custom builder of blow molding machinery and related trimming equipment. Also sell used and refurbished blow molding machines and equipment, full service parts and repair teams.

Italy. Design and manufacture of presses, carousels, blowing machines, electric steam generators, vacuum units, auxiliary machines and accessories for garment finishing processes. List of world wide dealers. English and Italian.

Linear Blow Molding Machine

Manufacturer of plastic blow molding machines and equipment, mold capacities from 20cc to 200 liters in PE, PP and PVC materials.

Specializing in building extrusion blow molds and designing and building of machine specific trim tooling.

Manufacturer of standard and automatic blow moulding machines, also manufactures moulds and bottles. Hong Kong.